Technical Specifications:

1. Clamp manufacturing machine with a rate of thirty pieces per minute (piece = half clamp)

2. The machine includes five stages: straightening, punching, feeding, bending, and cutting

3. The resulting clamp starts from 25 mm width and 27 mm internal diameter for the pipe being held

4. Clamp sizes can be changed by changing the machine program and replacing some parts

5. The machine pulls the steel strip from a coil holder outside the machine

6. Feeding is done via pull rollers in the machine and is controlled from the control panel

7. An encoder is installed on the steel strip to calculate feed lengths according to the program

8. The steel is punched according to the required sample by a punching head after the straightening stage

9. The clamp is formed by bending heads installed after the feed head

10. The cutting head is installed after the bending head

11. All machine movements are equipped with electrical sensors to adjust start and end signals

12. Programs can be run for the upper half only, the lower half only, or both halves together as needed

13. Distances between holes can be changed and the required holes selected from the machine program

14. Hole diameters can be changed by changing the punches in the punching heads

15. The machine is operated via a control panel with a touch screen and PLC unit

16. The machine operates with four motors with speed reducers, each 1 HP

17. The main parts of the machine are manufactured on a laser machine

18. Machine parts are painted with two coats of the appropriate color before assembly

19. The machine is assembled with bolted connections without using any welding in the assembly

20. Machine warranty is for one year, and defective parts are provided free of charge during the warranty